Why is a charge controller not necessary for a 5 watt solar panel?
My 5 watt solar panel car battery charger manual states that charge controller is not necessary for panels under 15 watts. I'm trying to understand the physics of why that's the case. Even if my panel is only putting out say 15 volts at 350mA couldn't it eventually overcharge a battery? What if the 5 watt solar panel were connected to a smaller battery, like a 7amp 12v, could it overcharge that battery? BTW, it has a diode to keep the battery voltage from discharging into the solar panel.
80w portable solar panel, 80watt folding pv module for 12v battery system
 | US $245.00 End Date: Thursday May-24-2012 3:26:39 PDT Buy It Now for only: US $245.00 Buy it now | Add to watch list |
Solar Battery Panel USB Charger for MP3 Cell Phone PDA
 | US $25.99 End Date: Thursday May-24-2012 3:33:26 PDT Buy It Now for only: US $25.99 Buy it now | Add to watch list |
A typical lead-acid battery can safely be “trickle charged” at C/100 rate, where C is the capacity (if you are talking car battery, that is about 50Amp-hours typical). C/100 for a 50Ah battery is 500mA, so 350mA won’t hurt it. The trickle-charge just overcomes losses due to battery self-discharge, which is fairly high in lead acid batteries. Your current is also limited by the internal impedance of the solar cell and diode.
On a small, 7Ah, 12V battery then, yes, you do run the risk of overcharging if you leave your solar panel connected because you will be charging at about C/20.
the normal charging rate for batteries is C/10, C/100 is used for keeping the battery fully topped off
you need a controller if the battery is small
small meaning less than about 100 times the charger’s capacity
so for 350 mA a battery of more than 35 AH would not “absolutely†need a controller
however it is always better to have one!
Guru